SkyRFID Left Graphic
SkyRFID Menu Graphic
>>
>>
>>
>>
>>
>>
>>
SkyRFID Bottom Menu Graphic

Bookmark and Share

 

RFID  860 ~ 960 MHz. Gen 2 EPCglobal and 902 ~ 928 MHz. Gen 2 Readers

SkyRFID provides a wide variety of Handheld RFID readers and Fixed RFID readers in the 860~960 MHz. frequency ranges and also in the 902~928 MHz. frequency range.

The readers that can receive and transmit data between 860~960 MHz. are classifed as Gen2 EPCglobal RFID readers and can be used in most countries in the world.  However - you must specify the country that you will be using the reader in when you order as the reader must be set to the correct country frequency and power setting when we ship it to you. 

The OEM manufacturers and SkyRFID will not be held liable in any way for a reader that has its frequency set wrong or its transmision power set too high for the local area regulations so the reader will be set to the country specific settings prior to delivery to you. 

Readers that are Gen 2 and 902~928 MHz. can be used in many countries plus all of North America without any problem.  These readers also have several different channels or frequencies to transmit with and you can usually adjust the power strength of each antenna port from 0 dBm ~ 30 dBm. 

Please note that putting out more power than 30 dBm is usually against regulations and every implemention should be checked for RF power output before going live.  This is very important when using high or ultra high gain antenna and low noise cables as you can produce more power in the read zone than the legal limit. Too high a power can cause harm to people and animals.

For more information about local area frequencies and power  - RFID Frequencies and Transmission Power

SkyRFID branded Gen 2 Readers Specifications

SkyRFID manufactured readers are specifically designed to be fully adjustable to fit to specific local radio regulations.  

All SkyRFID manufactured UHF Gen 2 readers are availailable in EU - 865 ~ 858 MHz or US 902~ 928 MHz. 

In addition to the specific EU or FCC frequencies each reader can be fully adjusted for sub band frequencies in the EU or US bands so that you can fine tune the bandwith between a minimum and maximum setting for both EU and US readers so users can choose the specifc local frequency ranges.  If the local radio regulations require only a single fixed channel setting this also is attainable.

For ensuring local radio regulations are met for power output the readers generally have 120 or more power settings so that you can vary the power between 0 db and 30 db.

When modulation is a concern SkyRFID readers modulation can be adjusted from a depth of 0 through 160 to meet even the most stringent local reader regulations.

 

Gen 2 Smart Phone Readers     Gen 2 Bluetooth Readers    UHF Gen 2 Handheld Readers     Gen2 EPC Global Fixed Readers    Gen 2 Desktop Readers    Gen2 Fixed Readers     Gen2 Reader Development Kits

UHF Gen 2 Smart Phone Reader

UHF Gen 2 Cell Phone/Tablet Reader Writer

Sky Cell Phone UHF Gen 2 Reader Writer

 

Small portable reader designed to connect to cell phones, tablets and other hardware operating on iOS or Android.

Simply plug the reader into the 3.5 mm earphone plug and activate the reader program.

Comes with demonstration Software, Installation Instructions, USB charging cable, SDK for Andorid and SDK for Apple iOS

 

Request Information

 

UHF Gen 2 Bluetooth Reader

UHF Gen 2 Bluetooth Reader SKYR960BTSL2 

SKYR902BT2.JPG

Small portable bluetooth reader designed to connect to Smartphones

Supports EPC Class1 Gen 2 reader functions

Comes with demonstration Software, Installation Instructions, USB charging cable

Optional Dual HF/UHF  for ISO 14443A and ISO 18000-6C

 

 

Request Information

 

UHF Gen 2 Bluetooth Reader Writer SKYR960BTSL2 

SkyRFID Hand Held Bluetooth Reader Writer

 Multi-purpose UHF Gen2 Portable Reader/Writer designed for commercial use. The compact unit can be successfully deployed for field service, warehousing, military, and more for use with Windows PC, Tablet, Android and iPhone Smartphone's.

Supports EPC Class1 Gen 2 reader functions

All Standard Order Configurations come with 1 Main 2260 mAh Li-ion Rechargeable Battery, , Adapter Type Charger, Synchronization Cable, Electronic Manuals, Charging Cradle and SDK's (Software Development Kit)

OptionalISO 1800-6B configuration available

Request Information

 

 

 

 

Portable Handheld UHF RFID Readers 

Handheld RFID Reader SKYR902HHAB

Sky Windows or Windows Embedded Hand Held Reader

Multi-purpose UHF Gen2 Portable Reader/Writer designed for commercial use.

The compact PDA style unit, running Windows CE 5.0 or Windows Embedded 6.5 OS, can be successfully deployed for field service, warehousing, supply-chain, asset, retail POS inventory control and more.

Optional Wi-Fi 802.11 a/b/g reader can be configured for HF – 13.56 MHz or UHF US or UHF EU and Bluetooth,

GPS,

GMS/GPRS, HSPA+, WCDMA,

Camera w/Flash and SAM
 

Request Information

 

 

 

 

Handheld RFID Reader SKYR902HHAT

SKY UHF GEN 2 Portable Reader

Multi-purpose UHF Gen2 Portable Reader/Writer designed for commercial use. 

Marvell™ PXA 320 806 MHz processor, 

Microsoft® Windows™ CE 5.0 / Windows™ Embedded Handheld 6.5(optional). 

Optional Wi-Fi 802.11 a/b/g reader can be configured for HF – 13.56 MHz or UHF US or UHF EU and Bluetooth,

GPS,

GMS/GPRS, HSPA+, WCDMA,

Camera w/Flash and SAM

 

Request Information

 

 

 

Handheld RFID Reader SKYR902HHC

Sky Compact Portable UHF Gen 2 Reader

 

Compact multi-purpose UHF Gen2 Portable Reader/Writer designed for commercial use.

Marvell™ PXA 320 806 MHz processor

Microsoft® Windows™ CE 5.0 / Windows™ Embedded Handheld 6.5

Optional Wi-Fi 802.11 a/b/g reader can be configured with HF – 13.56 MHz or UHF US or UHF EU and Bluetooth

Optional 1D or 2D Barcode Reader

 

 

Request Information 

 

 

IP 64 Rated Handheld RFID Reader SKYR902HHIP64

 

Sky IP64 Rated Hand Held UHF Gen 2 Reader

 Weatherproof and handles rain snow and more!

  This rugged IP64 Portable Reader/Writer is a multi-protocol 860 ~ 960 MHz RFID device designed for enterprise use. The compact PDA style unit, running the latest Windows Mobile OS, can be successfully deployed for Asset, Healthcare  patient tracking, Fleet Maintenance, etc… Comes complete with demonstration programs and documentation.

 Samsung ARM920T 533 MHz Processor

 Microsoft Windows CE 6.0

 Water resistant and dustproof IP64 1.5 M (4.9’) drop to concrete – 6 drops/side, 6 sides 3 angles

 

  Request Information

 

 

 

 

 

 

 

Multi-Protocol Handheld RFID Reader SKYR902HHLHN-FCC 

SkyRFID Industrial Duty UHF 900 Reader

This handheld RFID reader writer is a multi-protocol compact PDA designed specifically for commercial use. The unit operates on Microsoft® Windows™ CE 5.0 / Windows™ Embedded Handheld 6.5(optional) and can be configured for most countries and regions in the world. 

Marvell™ PXA 320 806 MHz processor with 512MB RAM/512MB ROM

Wireless LAN Option: IEEE 802.11 b/g/a

Bluetooth Option: Class Ⅱ, v 2.1 +SPP Only

WWAN Radio Option: 3G GSM/GPRS/HSDPA/HSPA+

GPS Option: Integrated D-GPS (Differential) or A-GPS (Assisted)

Options: 1D or 2D bar code, CMOS 3.0 Megapixel Camera

IP65 Rating

 Request Information

 

 

 Android Rugged Tablet UHF Gen 2 Reader Writer SKYR902TH1-US


SkyOEM Rugged Android Gen 2 Tablet Reader WriterMulti-purpose UHF Gen2 Portable Reader/Writer designed for commercial use. SkyRFID Rugged Tablet with a 7" touch screen and IP66 rating. Aluminum alloy internal frame, with 1.2 mm tempered glass touch screen. Able to withstand repeated drops (1.2m) at any angle, waterproof, dustproof drop and scratch.

Frequency: EU/ETSI 865 ~ 867.5 MHz or US/FCC 902 ~ 928 MHz

Protocol: EPC class 1 GEN 2, ISO 18000-6C, 18000-6B (optional)

Reading Distance: 0 ~ 3 m (0 ~ 10‘)(tag and enviroment dependent)

Writing Distance: 0 ~ 2 m (0 ~ 6‘)(tag and enviroment dependent)

OPERATING SYSTEM: Android 4.2.2 Jelly Bean

Wireless LAN: IEEE 802.11 B/G/N

Bluetooth: BT4.0 (A2DP+EDR)

WWAN Radio: 2G/3G GSM850/900/1800/1900 and optional WCDMA 850/2100 (850/1900/2100 option)

GPS: Satellite Navigation GPS chip built-in, support A-GPS,EPO Option - 1D or 2D Barcode Reader

 

  

Gen 2 EPCglobal Fixed Readers 

Impinj Speedway EPCglobal Gen 2 Reader Writer

SkyRFID Impinj Speedway Reader.jpg

 

Certified for conformance and interoperability to the EPCglobal™ Class-1 Generation-2 UHF RFID Protocol for operation in dense-interrogator environments. Compliant to the ISO 18000-6 Type-C UHF RFID Standard.

Software-defined radio architecture provides best-in class performance and maximum flexibility to support anticipated future EPCglobal™ standards. 

A tuning range that spans the North American 902 – 928 MHz ISM band, a tuning step size that allows operation under FCC 15.247 guidelines, and frequency accuracy and stability that satisfies the EPCglobal dense-interrogator frequency requirements over a temperature range of –20 °C to +55 °C.

Operation in Europe (865 – 868 MHz under ETSI EN 302 208-1) and Japan (952 – 954 MHz), and other regions.  Request Information

 

 

 

Impinj Speedway Revolution EPCglobal Gen 2 Reader Writers

SkyRFID Speedway Revolution Readers

 
 
 Impinj new Autopilot readers that automatically senses environment and configures readers settings for best performance. EPCglobal compliant design.
 
Fully supports Impinj Monza 4 family tag chip features. High transmit power capable to overcome cable losses.  
 
Industry standard application interface with support for EPCglobal Low Level Reader Protocol (LLRP) 
 
 2 or 4 port antenna models - 
 
GPIO -  inputs, optically isolated 3-30V; 4 outputs, optically isolated, 0-30V, non-isolated 5V, 100mA supply (DB-15)
 
Power over Ethernet IEEE 802.3af standard 
 
US, Canada, and other regions following US FCC Part 15 regulations or Geographies. Europe and other regions following ETSI EN 302 208 v1.2.1 without LBT regulations
Approved for use in Brazil, Hong Kong, India, Uruguay, Vietnam
Pending regulatory approval – Australia, China, Malaysia, Singapore, Taiwan, and Thailand  Request Information

 

 

 

Gen 2 Development Kits

 

Impinj Speedway Revolution Development Kit

SkyRFID Impinj Speedway_Revolution_Eval_Kit

Impinj Speedway Revolution kit with 1 Speedway R420 reader, power supply, power cord, console cable, 2 - far-field anntennas, 1 Brickyard antenna, 1 mini Guardrail antenna, cables, samples tag pack and great firmware, testing software, programming libraries and documentation.

Gen 2 ISO 18000-6C FCC - 902~ 928 MHz, ETSI - 865 ~ 868 MHz or Brazil

Complete with Autopilot - for superior performance and versatility.

 

 

 

 

 Request Information

 

 

 

Gen 2 ISO 18000-6C 865~858 MHz or 902~ 928 MHz FHSS

 

RFID-UHF-Gen-2-4-Port-Reader Development Kit

Power Output - 20 ~ 30 dBm, Read Distance > 12 Meters

Communication: TCP/IP or RS232

Complete development kit with 1 reader, 2 9 dBi antenna, 2 - 7 meter low noise cables, SDK (Software Development Kit) Manual, Cables, Power Supply and More.

For those how need 4 antennas we provide a 1 reader, 4 antenna, 4 - 7 meter low noise cables, SDK, Manual, etc.

Antennas can be Linear polarized or Circular polarized - please advise when orderingRequest Information  

 

 

 

 

Gen 2 Desktop Readers

SkyRFID Gen 2 USB Desktop Reader Writer

SkyRFID UHF USB Desktop Reader Writer
 Gen 2 ISO 18000-6B, ISO18000-6C 902~928 MHz. USB Reader with integrated antenna.

Read distance more than 0.1 meters, Fixed frequency or FHSS (Frequency Hopping Spread Spectrum)

Power output - 0 ~ 20 dBm - 100 mw

Compact form factor - 113 mm x 83 mm x 25 mm

Complete with demonstration software and SDK for application development

USB for communications and power   Request Information

 

 

Gen 2 RFID USB Mouse Desktop Reader

SkyRFID UHF Gen 2 Mouse Reader

Gen 2 ISO 18000-6C 865 ~ 868 MHz EU , 902 ~ 928 MHz US, 952 ~ 954 MHz JP Models

Display: 3 status LED's Power, Tx/Rx

Power: USB powered max 2 W operational

RFID Power: 10 mw

RFID Read Range: up to 30 cm depending on transponder   Request Information

Dimensions: 80 mm x 57 mm x 19 mm

Mouse sized reader for conveniet use.  Ultra light and easy to carry around.  Plug and Play solution designed for applicaitons such as supply chain, industril automation, retail POS and others.

 

 

Gen 2 RFID USB POS Desktop Reader

SkyRFID UHF Gen 2 POS Reader

Gen 2 ISO 18000-6C 865 ~ 868 MHz EU, 902~928 MHz US, 952 ~ 954 MHz JP Models

Display: 3 status LED's Power, Tx/Rx

Communications: USB - Bluetooth Option

Power: USb Powered max 6 w operational, 600 mw standby

RFID Power: 45 mW ERP

RFID Read Range: up to 0.5 meters depending on transponder Request Information

Dimensions: 196 mm x 152 mm x 48 mm

Integrated UHF Gen 2 Desktop Reader Writer designed for Point of Sale applications.  Also perfect for office, industrial and commerical environments.  When used as POS reader can automatically save data or kill trasponders with special key enabled command.

Gen 2 Fixed Readers

SkyRFID Short Range Integrated Reader

SkyRFID UHF Gen 2 Short Range Integrated Reader.jpg

ISO 18000-6B, and Gen 2 ISO 18000-6C 865 ~ 868 Mhz EU or 902 ~ 928 MHz US Reader with integrated antenna.

Size: 250 mm x 250 mm x 70 mm, Weight: 1 Kg

Operating Temperatures: -20°C ~ 55°C ( -4°F ~ 131°F)

Storage Temperatures: -40°C ~ 80°C ( -40°F ~ 176°F)

Enclosure rating: IP65

Read distnace between 4 ~ 6 meters, FHSS ( Frequency Hopping Spread Spectrum)

Enclosure rating - IP65

Read distance more than 6 meters, FHSS (Frequency Hopping Spread Spectrum)

Power output - 20 ~ 30 dBm,  Communication ports - RS232, RS485 and Wiegand 26/34  Request Information

SkyRFID Mid Range Integrated Reader

SkyRFID Mid Range UHF Gen 2 Integrated Reader

Integrated Medium Range UHF Gen 2 reader writer with built in 8 dBi antenna.

Perfect for industrial and commercial environments.

Fully US or EU UHF Band EPC G2 /ISO 18000 6C certified also handles ISO180006B

Power adjustable and a complete SDK makes this unit ideal in a wide variety of environments.

Waterproof and dustproof – IP65

Operating Temperature: -40° ~ 80°C (-40° F ~ 176°F)

Storage Temperature: -40° ~ 80°C (-40° F ~ 176°F)    Request Information

SkyRFID Long Range Integrated Reader

EP800-back-W-S.gif
ISO 18000-6B, and Gen 2 ISO18000-6C 865 ~ 868 MHz EU or 902~928 MHz US  Reader with integrated antenna.
Size: 405 mm x 405 mm X 35 mm, Weight: 4 Kg

Operating Temperatures: -20°C ~ 55°C (-4°F ~ 131°F)

 Storage Temperatures: -40°C ~ 80°C ( -40°F ~ 176°F)

Enclosure rating - IP65  

Read distance more than 10 meters, FHSS (Frequency Hopping Spread Spectrum)

Power output - 2 ~ 30 dBm

Communication: RS232, RS485 and Wiegand 26/34 Request Information

 

 

 

 

 

SkyRFID Long Range 2 Port Reader

SkyRFID UHF 2 Port OEM Reader
Gen 2 ISO 18000-6B, ISO18000-6C 865 ~ 868 Mhz EU or 902~928 MHz US Reader, Fixed frequency or FHSS (Frequency Hopping Spread Spectrum)

Power output - 20 ~ 30 dBm, Read Distance >12 meters, one or two antenna

Communication: Standard with RS232, RS485 and Wiegand 26/34 or RJ45/RS232 Request Information

Configuration:  Low speed - LS, or High Speed - HS, Gen 2, ISO 18000-6B optional TK900

Size: 110 mm x  185 mm x 40 mm   

 

SkyRFID Long Range 4 Port Reader

SkyRFID 4 Port OEM Reader
Gen 2 ISO 18000-6B, ISO18000-6C 865 ~ 868 MHz EU or 902~928 MHz US Reader, Fixed frequency or FHSS (Frequency Hopping Spread Spectrum)

Power output - 0 ~ 30 dBm, Read Distance >12 meters, one to four antenna

Communication: Standard with RS232, RS485 and Wiegand 26/34 or RJ45/RS232 Request Information

Configuration:  Low speed - LS, or High Speed - HS, Gen 2, ISO 18000-6B optional TK900

Size: 110 mm x  185 mm x 40 mm   

 
SkyRFID RFID UHF Reader Logo
 
Handheld RFID Readers, Fixed RFID Readers UHF Frequencies
RFID Ultra High Frequency Readers and Reader/Writers 

      ©2007 ~ 2015 SkyRFID Inc.           Privacy and Security Policy

 
 


 

SkyRFID Bottom Graphic